- Follow all safety/environmental and quality requirements/procedures.- Work from shop orders, part prints, route and method sheets and direction and instruction from supervisor.- Maintain weld tips.- Weld components and units with specified size and type of weld, proper strength, and neat appearance. - Obtain welding, fixtures and positioners from storage, identified by part or tool number, as indicated on route sheet.- Weld beads of prescribed length, radius, and size to fasten elements securely together to meet specifications and leak proof seams when required. - Weld elements to make regular and irregular, eccentric, and symmetrical weldments of simple, ordinary, and complex design.- Vary amperage and voltage to obtain quality weld at...
All essential job functions are performed for 8 to 10 hour shifts. Overtime is based on business needs. *Actively participate in all distribution center level safety programs.*Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis.*Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common.*Push carts on rollers while picking parts in the bin area.*Match location numbers on order ticket with geographic location in warehouse to select correct part location.*Match part numbers on order with part numbers on packaging for accurate order...
- Assemble a wide variety of component parts to build a complete tractor, with on-line and off-line operations.- Work from SOPs, systematic check-off list, engineering specifications, process sheets, and method sheets.- Apply, align, attach, insert, and fasten various commodities, components, parts, sub-assemblies in required order and sequence.- Make adjustments as necessary as unit progresses down assembly line.- Report defective parts, improper function, or other quality issues to proper authority.- Visually check parts and entire assemblies for completeness, function, operation, and appearance, make adjustments and/or repairs as necessary.- Record defects into computer.- Take place of employees when absent, and perform various other duties when necessary.- Perform...
Aluminum Welder Responsibilities:- Weld components in flat, vertical, or overhead positions utilizing either GMAW or GTAW.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding - Prepare all material surfaces to be welded in accordance with cleanliness and bevel requirements - Cut aluminum extrusions to length as needed using saws- Detect faulty operation of equipment or defective materials and notify supervisors- Examine workpieces for defects and ensure conformance with specifications- Recognize, set up, and operate hand and power tools common to the welding trade- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment-...
CNH Industrial currently has an opening for a 3rd shift Engineering Prototype Shop Technician to join our team. This is a full-time position at our Engineering Facility in New Holland, Pennsylvania.Position requires working with computer design drawings, engineering specifications, and verbal instructions to fabricate, machine, weld, assemble and rework a variety of prototype components, lab fixtures, and test vehicles. Successful candidate will enter into a comprehensive four-year training program consisting of on-the-job training and related home study courses.
The Warehouse Associate will: - Actively participate in all distribution center level safety programs.- Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis.- Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common.- Push carts on rollers while picking parts in the bin area.- Match location numbers on order ticket with geographic location in warehouse to select correct part location.- Match part numbers on order with part numbers on packaging for accurate order fulfillment.- Prolonged standing and/or walking for long periods of time required.-...
Responsibilities- Welds together metal components as specified by layout, diagram, work order, welding procedures, using electric wire feed welding equipment;- Manually guides gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld and size of molten puddle.- Welds in flat, horizontal, and vertical positions.- Cleans or degreases weld joint or work piece using wire brush, portable grinder.- May cut metal plate or structural shapes using oxy/acetylene torch.- May use bore repair equipment, SMA equipment and carbon arc equipment.- Actively perform work to ensure WCM criteria is met.
Responsibilities- Operate and setup various CNC punch presses to punch various size and shaped holes in steel part configurations to specifications.- Secures and locates sheet material part in the correct position on the machine table per the set-up instructions.- Observes the machine operation, and verifies conformance of the work piece to specifications using various measuring devices.- Changes punches during the part operation and for set-ups using the machine control.- Uses the controls to select various part configurations and to edit and perform minor off set changes.- May be required to perform de-burring/de-slagging operations after the punching operation.- Responsible for keeping the punch and dies in excellent operating condition by...
Responsibilities- Set up and operate burning type computer controlled machines that cut/burn various shape and sizes out of plate or sheet metal of different thickness, length and width.- Selects specified torch nozzles, electrodes or cutting tips.- Down loads CNC program through DNC system.- Sets up machine from detailed set-up procedures.- Adjust head spacing and installs proper perishables, (tips, nozzles, electrodes etc.) and adjusts cutting rate depending on material thickness.- Produces a work piece to print specifications. Verifies conformance of the work piece to specifications using standard measuring.- May perform minor preventive maintenance per A.M. and/or P.M. procedures.- May be required to perform de-burring/de-slagging operations.- Actively perform...
Responsibilities- Sets up and operates surrounding CNC Brake to bend, notch, punch, form rolls, arc, or straighten metal plates or sheet metal and structural shapes to blueprint or sketch specifications.- Selects, positions, and aligns dies in machine ram and bed.- Turns set screws or bolts to fasten clamp bar that holds dies in position or activate hydraulic clamping.- Positions work piece manually or with crane hoists to align parts to the dies and back gauge.- Starts machine to lower ram or depresses pedal to activate.- Verifies dimensions of work piece, using templates or standard measuring equipment.- May grind laps or burs from edges of work piece using portable grinder.- Operate and maintain safety light curtain.- May perform minor preventive maintenance per...
Responsibilities- Sets up and operates surrounding CNC Brake to bend, notch, punch, form rolls, arc, or straighten metal plates or sheet metal and structural shapes to blueprint or sketch specifications.- Selects, positions, and aligns dies in machine ram and bed.- Turns set screws or bolts to fasten clamp bar that holds dies in position or activate hydraulic clamping.- Positions work piece manually or with crane hoists to align parts to the dies and back gauge.- Starts machine to lower ram or depresses pedal to activate.- Verifies dimensions of work piece, using templates or standard measuring equipment.- May grind laps or burs from edges of work piece using portable grinder.- Operate and maintain safety light curtain.- May perform minor preventive maintenance per...
Responsibilities- Set up and operate metal removal type CNC- computer numerated controlled machines that perform various operations and remove metal by drilling, tapping, boring, milling and spot facing according to specifications.- Must set-up the machine from detailed set-up procedures to include placing the fixture on the machine table/pallet in the correct position as per the set-up instructions and bolting /securing the fixture in position.- Must be able to set and adjust various cutting tools to set-up instructions and place in the machine tool changer.- Observe machine operation and verify conformance of the work piece to specifications using fixed gauges, calipers, micrometers and other standard measuring equipment as required.- May perform external minor assembly...
Responsibilities- Set up and operate metal removal type CNC- computer numerated controlled machines that perform various operations and remove metal by drilling, tapping, boring, milling and spot facing according to specifications.- Must set-up the machine from detailed set-up procedures to include placing the fixture on the machine table/pallet in the correct position as per the set-up instructions and bolting /securing the fixture in position.- Must be able to set and adjust various cutting tools to set-up instructions and place in the machine tool changer.- Observe machine operation and verify conformance of the work piece to specifications using fixed gauges, calipers, micrometers and other standard measuring equipment as required.- May perform external minor assembly...
Responsibilities- Identify problems with equipment using verbal and written instructions.- Communicate repair parts requirements or other skills required for repair regarding breakdowns, to parts planner and supervisor.- Primary focus will be maintaining equipment without a PLC control. Including but not limited to:- Weld Positioners- Overhead bridge systems- Carts- Power Tow Lines- Welding machines- Impact tools- Infrastructure air lines- Roller Conveyors- Plate/Shot Blaster- Power and Free- Hydraulic Press- Magnets- Lifting bails- Floor Scissor lifts- Vacuum lifts- Air leaks- Torit systems- Provides assistance on PLC controlled machines on an as-needed...
Responsibilities- Able to complete all items as required by industrial electrician job classification.- Identify problems with equipment using verbal and written instructions.- Communicate repair parts requirements or other skills required for repair regarding failure to supervisor.- Do breakdown electrical/electronic repair maintenance to equipment in an expeditious manner.- Operate N/C, CNC equipment for testing and in the repair of the equipment.- Must be able to do major reconditioning of equipment controls as requested.- Document resolution and parts used for repair and input to proper file and/or computer.- Calibrate equipment according to manufacturer’s specifications.- Must be able to operate forklift and other wheeled vehicles in the department.
Responsibilities- Identify problems with equipment using verbal and written instructions.- Maintain and repair robotic equipment and welding machines.- Communicate repair parts requirements or other skills required for repair regarding breakdowns to supervisor.- Operate robotic equipment for testing and in the repair of the equipment.- Must be able to do major reconditioning of equipment controls as requested.- Document resolution and parts used for repair and input to proper file and/or computer.- Calibrate equipment according to manufacturer’s specifications.- Must be able to operate forklift and other wheeled vehicles in the department.- Must be able to work with standard welding equipment.- Must understand and be able to do minimal machining.- Perform...
The Warehouse Associate will: - Actively participate in all distribution center level safety programs.- Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis.- Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common.- Push carts on rollers while picking parts in the bin area.- Match location numbers on order ticket with geographic location in warehouse to select correct part location.- Match part numbers on order with part numbers on packaging for accurate order fulfillment.- Prolonged standing and/or walking for long periods of time required.-...
Responsibilities- Develop production tooling as required using engineering drawings, tool designs or own ideas as required to complete task.- Set up and operate all equipment required to manufacture components to print.- Assemble jigs and fixtures.- Repair production tooling or improvise as required.- Use safe working practices and report unsafe working conditions.- Work with Manufacturing Engineering to improve manufacturing processes.- Actively perform work to ensure continuous improvement criteria is met.- Other duties as assigned.
Responsibilities- Perform a combination of assembly line tasks to assemble structural parts and electrical components using hand tools and portable power tools.- Perform Functional verification testing, make valve adjustments if required, work with FVS Operator to troubleshoot and fix defects identified by the FVS Test Platform, End of Line- Sets electrical components on all models.- Diagnose mechanical and electrical failures and repairs equipment components according to manuals and factory specifications using hand tools, power tools and testing instruments.- Use computer software to diagnosis problems and verify specifications.- Make all necessary updates in process verification system- Actively perform work to ensure continuous improvement criteria is met.
Responsibilities- Perform a combination of assembly line tasks to assemble structural parts and electrical components using hand tools and portable power tools.- Perform Functional verification testing, make valve adjustments if required, work with FVS Operator to troubleshoot and fix defects identified by the FVS Test Platform, End of Line- Sets electrical components on all models.- Diagnose mechanical and electrical failures and repairs equipment components according to manuals and factory specifications using hand tools, power tools and testing instruments.- Use computer software to diagnosis problems and verify specifications.- Make all necessary updates in process verification system- Actively perform work to ensure continuous improvement criteria is met.
Responsibilities We are currently seeking Assembly Operators to join our team in Fargo. Essential duties vary, depending on the area of the plant to which an employee is assigned. Duties may include all or a portion of the following, but are not limited to:- Tractor Assembly- Material Preparation- Warehousing- Repair
Responsibilities We are currently seeking Assembly Operators to join our team in Fargo. Essential duties vary, depending on the area of the plant to which an employee is assigned. Duties may include all or a portion of the following, but are not limited to:- Tractor Assembly- Material Preparation- Warehousing- Repair
The Warehouse Associate will: - Outbound Duties- *All employees are expected to actively participate in all depot level safety programs- *All employees are expected to actively participate in all depot level WCL programs*Picking*Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis*Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common. *Push carts on rollers while picking parts in the bin area.*Match location numbers on order ticket with geographic location in warehouse to select correct part location*Match part numbers on order with part...
- Work from part/assembly drawings, engineering specifications, and related information- Perform process and product audits and manages yard sweeps- Use a wide variety of precision measuring instruments- Work with dimensional reports daily- Support manufacturing quality reference investigating DAR/PDI/XPDI claims and following simple reactive projects- Follow-up shop problems and rework supporting plant quality and referring to manufacturing quality reference- Monitor containment actions and corrective actions put in place by the plant team- Support plant quality and manufacturing quality reference in monitoring plant quality KPI as ADPU, FTQ, TGW- Monitor processes execution as per instructions and quality procedures- Perform CPA (Customer Product Audit) and apply...
Rate of pay: $19.51 per hour + Shift differential All essential job functions are performed for 8 to 10 hour shifts. Overtime is based on business needs. *Actively participate in all distribution center level safety programs.*Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis.*Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common.*Push carts on rollers while picking parts in the bin area.*Match location numbers on order ticket with geographic location in warehouse to select correct part location.*Match part numbers on order with part...
The Warehouse Associate will: - Actively participate in all distribution center level safety programs.- Safely select, lift, and move parts that vary in size and weigh up to 40 pounds from various height locations, floor level and up, on a repetitive basis.- Operate mobile equipment and obtain parts at higher level racking locations requiring normal depth perception, agility and balance. Working in excess of 25 feet off floor level is common.- Push carts on rollers while picking parts in the bin area.- Match location numbers on order ticket with geographic location in warehouse to select correct part location.- Match part numbers on order with part numbers on packaging for accurate order fulfillment.- Prolonged standing and/or walking for long periods of time required.-...
Responsibilities- Identify problems with equipment using verbal and written instructions.- Communicate repair parts requirements or other skills required for repair regarding breakdowns, to parts planner and supervisor.- Primary focus will be maintaining equipment without a PLC control. Including but not limited to:- Weld Positioners- Overhead bridge systems- Carts- Power Tow Lines- Welding machines- Impact tools- Infrastructure air lines- Roller Conveyors- Plate/Shot Blaster- Power and Free- Hydraulic Press- Magnets- Lifting bails- Floor Scissor lifts- Vacuum lifts- Air leaks- Torit systems- Provides assistance on PLC controlled machines on an as-needed...
Aluminum Welder Responsibilities:- Weld components in flat, vertical, or overhead positions utilizing either GMAW or GTAW.- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding - Prepare all material surfaces to be welded in accordance with cleanliness and bevel requirements - Cut aluminum extrusions to length as needed using saws- Detect faulty operation of equipment or defective materials and notify supervisors- Examine workpieces for defects and ensure conformance with specifications- Recognize, set up, and operate hand and power tools common to the welding trade- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment-...
Responsibilities Include:- Apply, align, attach, insert, and fasten various commodities, components, parts, sub-assemblies, or units to chassis in required order and sequence. - Work from Engineering specifications (work instructions), sketches, schematic diagrams, blueprints, process sheets, check sheets, photo books, and verbal instructions. - Perform necessary adjustments as unit progresses down assembly line. - Record defects that require off-line and on-line corrections. - Detect and report improper operation, faulty equipment, excessive continuation of defective parts, improper function, and assembling to proper supervision or management. - Visually check parts and entire assemblies for completeness, function, operation, and appearance. - Assist in the development of...
Assembler Responsibilities:- Build assemblies as required, following a print to ensure each and every part is built correctly and thoroughly. (Attention to detail is important.- Operate fabrication equipment as needed: Waterjet, tube cutter, press brake, grinder, plate beveler (No experience necessary, just a desire to learn.)- Material handling / forklift operating- Ensure workspaces are kept tidy and materials organized.
- Diagnose mechanical failures & conduct repairs/part installations on prototype & current production agriculture equipment by referencing engineering prints & models, engineering specifications, & work order instructions.- Communicate highly technical information, both verbal & written to engineering staff through discussions and email.- Assist engineers in determining mechanical component or system failures of complex prototype vehicles.- Test equipment after reassembly to ensure proper functionality, and perform any adjustments as necessary.- Document work completed & techniques used in work order after project completion- Operate heavy equipment such as tractors, wheel loaders, forklifts, etc. for material handling purposes as well as test yard maintenance.